AEI Cables - Firetec Power

logo

Login Help

Please enter your email address that you registered with. We will email you your password so you can sign in.

Your email and password are case sensitive.

* denotes a mandatory field.

Member Login

Update my password

Lost Login

Not a member yet?

Update my profile

Firetec Power

Product Datasheets and Approvals

Firetec PowerPrint summary for selected product(s)
Print
Compare two selected products
Compare
Firetec Power
BASEC
LPCB
Cert No 221k/01
 Product Image
Datasheet
Approval    
3D Model
Voltage Rating 600/1000 volts
Description Firetec Power is a fire resistant armoured cable suitable for use in fixed installations for power circuits, fire alarm systems & emergency lighting systems. It is robust, flexible and suitable for use inside and outside buildings, meeting the enhanced grade of BS5839 26.2e.
Construction Stranded plain annealed copper conductors. Mica/glass fire barrier tape. Cross linked polyethylene insulation (XLPE). LSZH bedding, steel wire armouring and LSZH outer sheath.
Operating Temperature -10degC to +90degC
Minimum Bending Radius 6 x overall diameter
8 x for 25mm² and above
Core Identification 2 core Bn, Be
3 core Bn, Bk, Gy
4 core Bn, Bk, Gy, Be
Multicore - white cores with black printed numbers
Lengths Cut lengths on request.
Sheath Colour Black
Manufacturing Standard BS 7846
Code of Practice/
Guide to Use
BS5266
See special notes below
Fire Tests BS 6387 C W & Z
BS 7846 F2
BS 8434-2
BS EN 50200 PH30, PH60, PH120
Emissions and
Flame Propagation
BS EN 50267 (IEC 60754) Acid Gas Emission
BS EN 50268 (IEC 61034) Smoke Emission
BS EN 50265,50266 (IEC 60332) Flame Propagation
Special Notes 1. Old core colours available. 2c Rd, Blk. 3c Rd, Yw, Be. 4c Rd, Yw, Be, Blk.
2. This cable can be supplied without steel wire armour for situations where sufficient mechanical protection already exists and where a smaller, lighter, more flexible cable would be preferred. Simply request details of our Firetec Unarmoured range of cables. Fire resistant to BS 6387 C W & Z, LSZH material used throughout, LPCB approved.
3. Methods of cable support should withstand a similar temperature and duration to that of the cable
. 4. Testing at AEI confirms compliance with BS8519 Category 1, 2 & 3 Control and meets the requirements for an enhanced grade of cable to BS5839 26.2e.

product

Product Categories

Current Ratings

Navigation Key

  • Product Datasheet
  • Product Approval(s)
  • Product 3D Model
  • Compare two selected products
  • Print summary data for selected products

Helpful Hints

  • info

    Product detail can be viewed by clicking on the desired product title.

  • info

    When viewing a 3D cable model, use the mouse to control rotation. The names of component parts will be shown when hovering over the model.