AEI Cables - Conduit Wiring

Login Help

Please enter your email address that you registered with. We will email you your password so you can sign in.

Your email and password are case sensitive.

* denotes a mandatory field.

Current Password:* New Password:* Confirm Password:*

Email:* Name:* Company:* Job title:* Tel. no: Ebulletin subscription ?

Conduit Wiring

Product Datasheets and Approvals

Conduit Wiring


Datasheet
Approval
3D Model
Voltage Rating	450/750 volts
Description	Low Smoke Zero Halogen (LSZH) Conduit Wiring. For use in situations where smoke and acid gas emission from fire affected cables would be hazardous to people and equipment. Primarily for use within conduit or trunking but may also be used where suitable protection against mechanical damage exists eg within light fittings, switchgear and control gear.
Construction	Stranded plain copper conductors, LSZH insulation
Operating Temperature	-15degC to +90degC
Minimum Bending Radius	3x 1.5sq to 25sq 4x 35sq to 185sq 6x 240 to 630sq
Core Identification	Bn, Be, Bk, Gy, Gn/Yw, Rd, We
Lengths	100/500m. Special lengths available on request
Sheath Colour	N/A
Manufacturing Standard	BS7211:1998 Table 3a BS EN 50525-3-41 Table B1
Code of Practice/ Guide to Use	BS 7540
Fire Tests	N/A
Emissions and Flame Propagation	BS EN 50267 (IEC 60754) Acid Gas Emission BS EN 50268 (IEC 61034) Smoke Emission BS EN 50265 (IEC 60332) Flame Propagation
Special Notes	Where a conductor operates at a temperature exceeding 70C it shall be ascertained that the equipment connected to the conductor is suitable for the conductor operating temperature. Min temperature for installation is +5degC


Datasheet
Approval
3D Model
Voltage Rating	450/750 volts
Description	PVC Conduit Wiring. Primarily for use within conduit or trunking but may also be used where suitable protection against mechanical damage exists eg within light fittings, switchgear and control gear.
Construction	Solid or stranded plain copper conductors, single core, PVC insulation
Operating Temperature	-15degC to +70degC
Minimum Bending Radius	3x 1.5sq to 25sq 4x 35sq to 240sq 6x 300 to 630sq
Core Identification	Bn, Be, Bk, Gy, Gn/Yw, Yw*, Rd. Oe, Pk, Te, Vt, We
Lengths	100/500m 1.5 - 4.0 50/100/500m 6.0 - 25 Special Lengths available on request
Sheath Colour	N/A
Manufacturing Standard	BS6004 2000 Table 4a* BS EN 50525-2-31 Table B1
Code of Practice/ Guide to Use	BS 7540
Fire Tests	N/A
Emissions and Flame Propagation	BS EN 50265
Special Notes	* yellow is a non harmonised colour to BS6004 2000 Table 4a only Min temperature for installation is +5degC

Helpful Hints

Product detail can be viewed by clicking on the desired product title.
When viewing a 3D cable model, use the mouse to control rotation. The names of component parts will be shown when hovering over the model.